Estudio de las propiedades de adsorción – desorción de gases en los sistemas petroleros no convencionales en México y su aplicacion al modelo cinético de generación de hidrocarburos
Institution:
Université de LorraineDisciplines:
Abstract EN:
The main objective of this research was to conduct a study of the gas adsorption/desorption properties in unconventional reservoirs located in the north-eastern Mexico. For this, previously was carried a literature review concerning gas exploration retaking existing research works in Sabinas Basin and Chihuahua Basin (Camacho Ortegón 2009, De la O Burrola, 2013), in order to understand their behavior from the viewpoint of unconventional reservoirs. The works of these authors include models that describe the thermomechanical history of the Sabinas Basin, geological events that define the behavior of the petroleum system, its evolution and its relationship with hydrocarbon generation. To continue with the development of this project, in 2012 a sampling campaign was performed in charge of the Servicio Geológico Mexicano (SGM), providing a total of 50 samples divided between the Sabinas Basin and the Chihuahua Basin, for their characterization. The general characterization included: (1) immediate or primary moisture and ash analysis (2) elemental analysis (C, H, O, N, and S) for determining, (3) petrographic analysis to determine the organic matter type (4) Rock-Eval®6 Pyrolysis, to know its oil potential generation. Together, these analyzes allowed us to evaluate and select 10 samples divided between the study basins, to develop adsorption/desorption tests and interpretation of parameters affecting the adsorption process. For the Sabinas Basin, there were observed storage capacities of methane gas of 202.11 scf/ton (7.07m3/ton) to 364.76 scf/ton (10.47m3/ton), whereas for the Chihuahua basin there were presented lower capacities of sorption, with a rank from 0.84 scf/ton (0.023m3/ton) to 3.48 scf/ton (0.084m3/ton). The tests results of adsorption/desorption let us carry out an interpretation of the physical and chemical characteristics of the samples, that influencing in the storage capacity of gas in the kerogen. Anticipating as a general conclusion that, the gas adsorption increases with the rank/maturity. Also, it was studied the influence of the maceral composition in the process of sorption and, it was verified that the capacity of gas storage is closely related to the vitrinite content. Which led us to return to the statements of some authors (Chalmers y Bustin, 2008; Zhang et al, 2012) who verified that the capacity of adsorption on base to COT increases in the next order: type I < type II < type III. This was attributed to the greater capacity of adsorption of the vitrinite in comparison with other macerals types. In this regard, and carrying out a thorough observation to the kinetic models, and mainly in the adsorption factors (W) proposed by the most recent version of the Software PetroMod (Type I, W=0.80), (Type II W=0.75) and (Type III W=0.68), it was found a discrepancy regarded to the bibliography reported by (Chalmers y Bustin, 2008; Zhang et al, 2012). In this context, the results of adsorption/desorption gas of this research were retaken to make the calculation of the adsorption factor (W) to build and propose a new kinetic model applicable to the simulation process of the Software PetroMod for the hydrocarbons generation, taking into account the adsorption of the hydrocarbons produced. The new kinetic model allowed us propose a readjust to the geochemical modeling for the Sabinas basin, comparing at the same time the effect and the influence of the adsorption factors at the moment of the generation and expulsion of hydrocarbons. This kinetic model through the Factor (W) results important, since it takes the amount of adsorbed hydrocarbons into the source rock, this factor evidently induces a control on the behavior of unconventional character for the source rock, thus producing a change into the expulsion balance of the hydrocarbons from the kerogen. The results obtained from the methodology, [...]
Abstract FR:
L'objectif principal de cette recherche a été de réaliser une étude des propriétés d'adsorption/désorption du gaz dans les réservoirs non conventionnels situés dans la partie nord-est du Mexique. Nous avons commencée par un revue de la littérature concernant à l'exploration de gaz, reprenant des recherches existantes sur le Bassin de Sabinas et le Bassin de Chihuahua (Camacho Ortegón 2009, De la O Burrola, 2013) afin de comprendre leur comportement du point de vue de réservoirs non conventionnels. Ces auteurs proposent des modèles qui décrivent l'histoire thermomécanique du bassin de Sabinas, des événements géologiques qui définissent le comportement du système pétrolier, son évolution et sa relation avec la production d'hydrocarbures. Nous avons réalisé une campagne d'échantillonnage en collaboration avec le Servicio Geológico Mexicano (SGM) au Mexique. Ils nous ont proposé un total de 50 échantillons répartis entre le Bassin de Sabinas et Chihuahua pour leur caractérisation. Cette caractérisation générale inclus: (1) Analyse immédiate ou primaire de l'humidité et de cendre (2) Analyse élémentaire pour déterminer (C, H, O, N, et S), (3) Analyse pétrographique pour déterminer le type de matière organique (4) Pyrolyse Rock-Eval®6 afin de connaître son potentiel pétrolier. Toutes ces analyses nous ont permis de sélectionner 10 échantillons entre les deux bassins de l'étude, afin de développer nous essais d’expérimentation d'adsorption/désorption de gaz et interpréter ainsi par les courbes de Langmuir les paramètres affectant le processus d'adsorption du CH4 et CO2. Pour le Bassin de Sabinas, ont été mesurés des capacités de stockage de gaz méthane à partir de 202.11 scf/tonne (7.07 m3/tonne) à 364,76 scf/tonne (10.47 m3/tonne), alors que pour le Bassin du Chihuahua les capacités de sorption sont plus faibles, variant de 0,84 scf/tonne (0.023 m3/tonne) à 3,48 scf/tonne (0.084 m3/tonne). Ces résultats nous ont permis d'apporter une interprétation des caractéristiques physiques et chimiques qui influent sur la capacité de stockage de gaz dans le kérogène des roches sédimentaires de type Shale gas. Nous avons trouvé que dans les bassins étudies l'adsorption de gaz augmente avec le rang/maturité des matières organiques sédimentaires. Nous avons également étudiée l'influence de la composition Macérale sur les processus de sorption et nous avons vérifié que la capacité de stockage de gaz, est étroitement liée à la teneur en vitrinite. Cela nous conduit à prendre en considération les publications de certains auteurs (Chalmers et Bustin, 2008; Zhang et al, 2012) qui ont vérifié dans leurs travaux que les augmentations de la capacité d'adsorption sur la base du COT sont dans l'ordre suivant: le type I <Type II <type III. Cela a été attribué à la capacité d'adsorption précoce de la vitrinite par rapport aux autres types de macéraux. À cet égard, en effectuant une observation approfondie sur les modèles cinétiques principalement sur les facteurs d'adsorption (W) proposé par la dernière version du logiciel PetroMod (type I, W = 0,80), (Type II W = 0,75) et (Type III W = 0,68), a été constaté un écart par rapport à la littérature rapporté par (Chalmers et Bustin, 2008; Zhang et al, 2012). Nous avons pris en compte en conséquence nous résultats de gaz d'adsorption/désorption pour effectuer le calcul du facteur (W) et construire et proposer un nouveau modèle cinétique pour nous bassins avec la simulation du Software PetroMod, en prenant en compte l'adsorption. Le nouveau modèle cinétique nous a permis de proposer un réajustement et optimisation à la modélisation géochimique du Bassin de Sabinas, et réaliser ainsi au même temps une comparaison de l'effet des facteurs d'adsorption au moment de la production d'hydrocarbures et de l'expulsion. Ce modèle cinétique avec le nouveau Factor (W), prend en compte la quantité d'hydrocarbures adsorbés par les matières organiques de la roche avec un comportement pétrolier non conventionnel, [...]