Etude des mécanismes de recristallisation dans un acier IF-Ti après faible déformation par laminage ou par traction
Institution:
Paris 11Disciplines:
Directors:
Abstract EN:
This work permit to establish a relation between the substructures of deformation of an IF-Ti deformed by rolling (40%) or tensile strain (35%) and the recrystallization mechanisms. With this intention, the substructure of deformation was characterized by transmission electronic microscopy for the three principals components of the deformation texture: the {111}<112> orientation of the fiber and the {111}<110> and {001}<110> orientations of the fiber. Two types of substructures were observed: lamellar bands for the {111}<112> grains and equiaxed cells for the grains of the fiber. This characterization of the deformed state was completed by an estimation of the stored energy using various approaches (neutrons diffraction, EBSD, TEM) and showed the following hierarchy: E{111}<112 > > E{111}<110 > E{001}<110 >. The first stage of annealing is characterized by recovery. This process is assumed by: refinement of the walls of cells, the vanishing of dislocations inside the cells, the coalescence and growth of the cells. The cellular substructure is most favourable to the growth. For the two observed substructures, a sufficient size is necessary to ensure the formation of a viable nucleus. The formation of recrystallized grains is ensured by two mechanisms: generalized recovery mainly observed for the substructure of lamellar bands and the "Bulging" specific to the équiaxes substructures.
Abstract FR:
Ce travail a permis d’établir une relation entre les sous-structures de déformation d’un acier IF-Ti déformé par laminage (40%) ou par traction (35%) et les mécanismes de recristallisation. Pour ce faire, la sous-structure de déformation a été caractérisée par microscopie électronique en transmission pour les trois principales composantes de la texture de déformation : orientation {111}<112> de la fibre et orientations {111}<110> et {001}<110> de la fibre . Deux types de sous-structures ont été observées : des bandes lamellaires pour les grains d’orientation {111}<112> et des cellules équiaxes pour les grains de la fibre . Cette caractérisation de l’état déformé a été complétée par une estimation de l’énergie stockée à l’aide de différentes approches (diffraction des neutrons, EBSD, MET) et a montré la hiérarchie suivante : E{111}<112> > E{111}<110> E{001}<110>. La première étape du recuit est caractérisée par une restauration. Ce processus est assuré par : l’affinement des parois de cellules, le nettoyage des dislocations à l’intérieur des cellules, la coalescence et la croissance des cellules. La sous-structure cellulaire est la plus favorable à la croissance. Pour les deux sous-structures observées, une taille suffisante est nécessaire pour assurer la formation d’un germe viable. La formation de grains recristallisés est assurée par deux mécanismes : la restauration généralisée majoritairement observée pour la sous-structure de bandes lamellaires et le « bulging » spécifique aux sous-structures équiaxes.