Contribution du couplage CE-ICP/MS dans l'étude des interactions métals-protéine non-covalentes
Institution:
Université Louis Pasteur (Strasbourg) (1971-2008)Disciplines:
Directors:
Abstract EN:
The screening of metal/protein interactions using CE coupled to ICP/MS was investigated. The development of this new analytical tool requires, besides the hyphenation of the two techniques, both an efficient separation of the proteins and a sensitive detection of metals. The optimization of the electrophoretic separation of a protein-test mixture led to the use of a borate buffer, pH 9. 2, which both minimizes adsorption and allows the separation of all proteins’ mixture with a good migration times reproducibility. The hyphenation between capillary electrophoresis and ICP/MS was performed using a sheath flow interface. The optimization of parameters, such as coolant, auxiliary and nebulizer gases, composition and flowrate of the sheath flow solution and position of the capillary in the nebulizer was carried out in order to obtain the best detection sensitivity and separation efficiency. However, this type of interface involves important samples dilutions, which led us to develop an on-line preconcentration technique in order to improve the detection limits. The detection limits calculated for the copper and zinc contained in the carbonic anhydrase, the less efficiently concentrated protein, showed an improvement of the detection limits in CE-ICP/MS of 6 times for copper and 5 times for zinc. CE-ICP/MS was then used in the study of the interactions of three transition metals (Cd, Co and Ni) with a mixture of proteins made of metalloproteins and major blood serum proteins. These studies revealed a similar behavior of cobalt and nickel, completely different from that of cadmium. In the case of the metalloproteins, hyphenated CE-ICP/MS allowed to identify the probable nature of the interaction sites. Moreover, this method allowed studies on the relative affinity of various metals with a mixture of proteins. The dissociative aspect of the separation was also exploited in order to obtain kinetic data which allowed the access to the dissociation constants of the complexes and in certain cases, highlighted the presence of multiple interaction sites. Finally, the technique was applied to so-called “hard cations”: lanthanides and uranyl ion (UO22+). The first results showed a massive adsorption of these cations on the capillaries surface. Nevertheless, the studies, carried out on a mixture of six proteins, previously identified as uranium-targets, showed that four of them interact with the uranium, among which albumin and transferrin.
Abstract FR:
Le criblage des interactions protéine/métal grâce à l’utilisation du couplage CE-ICP/MS a été étudié. La mise au point de ce nouvel outil analytique nécessite, outre un interfaçage de ces deux techniques, ine séparation efficace des protéines et une détection sensible des métaux. L’optimisation de la séparation électrophorétique d’un mélange de protéines-test a conduit à l’utilisation d’un tampon borate à pH 9,2, qui minimise l’adsorption et permet la séparation de toutes les protéines du mélange avec une bonne reproductibilité des temps de migration. L’interfaçage entre l’électrophorèse capillaire et l’ICP/MS a été réalisé à l’aide d’une interface avec une solution conductrice. L’optimisation des paramètres tels que débits des gaz, débit et composition de la solution conductrice et position du capillaire dans le micronébuliseur a été réalisée afin d’obtenir les meilleures sensibilité de détection et efficacité de séparation. Toutefois, ce type d’interface entraîne des dilutions importantes des échantillons, qui nous ont conduits à développer un système de préconcentration en ligne afin d’améliorer les limites de détection. Le calcul des limites de détection réalisé sur le cuivre et le zinc contenus dans l’anhydrase carbonique, protéine la moins efficacement concentrée, montre une amélioration des limites de détection en CE-ICP/MS de 6 fois pour le cuivre et 5 fois pour le zinc. Ce couplage a ensuite été utilisé dans l’étude des interactions de trois métaux de transition (Cd, Co et Ni) avec un mélange de protéines constitué de métalloprotéines et protéines majeures du sérum sanguin. Ces études montrent un comportement similaire du cobalt et du nickel, différant totalement de celui du cadmium. Dans le cas des métalloprotéines, le couplage CE-ICP/MS permet également de conclure quant à la nature probable des sites d’interaction. De plus, cette méthode a permis d’étudier l’affinité relative des différents métaux vis-à-vis du mélange de protéines. L’aspect dissociatif du couplage a également été exploité pour obtenir des données cinétiques, permettant l’accès aux constantes de dissociation des complexes et dans certains cas, à la mise en évidence de sites d’interaction multiples. Enfin, la technique a été appliquée à des cations dits « durs » : lanthanides et uranyle (UO22+). Les premiers résultats démontrent une adsorption massive de ces cations à la surface des capillaires. Néanmoins, les études réalisées sur un mélange de six protéines, préalablement identifiées comme cibles de l’uranium, montrent que quatre d’entre elles interagissent avec l’uranium, parmi lesquelles l’albumine et la transferrine.