Etude des relations microstructure/propriétés mécaniques des aciers bas carbone microallies, en fonction des paramètres du traitement thermique et thermomécanique
Institution:
Lyon, INSADisciplines:
Directors:
Abstract EN:
Low carbon micro-alloyed steels produce today a lot of metallic materials having high level of potentialities because of the possibility to use an elaboration processing more economic in association with interesting mechanical properties. Especially ' such steels have high mechanical strength coupled with a high toughness and a low brittle/ductile transition temperature. Our study has consisted in approach of characterization at two levels: - First one is a micro structural characterization by using of optical microscopy, scanning electron microscopy, transmission electron microscopy and microanalysis devices. - the second corresponds to a mechanical testing investigation such as tensile test, Charpy-V or U-notched test, BDWTT test, nano-hardness. The finality of these investigations has to carry out the correlation between the varied types of “bainitic” microstructures and the mechanical properties. The mixing of the bill type bainite and the tempered martensite provides the better compromise between the requirements asked for applications. However, this compromise is accessible only with the contribution of the micro-alloyed elements, which originate a precipitation under the form of the carbonitrides. These last contribute to the grain refinement in steels. This condition is absolutely necessary in order to have a high level of mechanical properties.
Abstract FR:
Les aciers bas carbone micro-alliés constituent aujourd'hui une classe de matériaux métalliques à forte potentialité en raison de la simplicité de leur procédé d'élaboration et de leurs caractéristiques mécaniques intéressantes. Notamment, ces aciers possèdent des résistances mécaniques élevées couplées à une bonne résilience et à une basse température de transition ductile/fragile. Notre étude a consisté en une caractérisation présentant deux volets : - le volet microstructural abordé par les moyens des microscopies optique, à balayage et transmission et les moyens micro-analytiques ; -le volet mécanique à partir d'essais conventionnels (essai de traction, essai Charpy, essai BDWTT, nanodureté). La finalité du travail était d'appréhender la corrélation entre les états microstructuraux complexes du type « bainitique » avec les caractéristiques mécaniques. La mixité de la variante bainitique bill avec une martensite revenue, assure le meilleur compromis entre les exigences imposées par les conditions en service. Cependant, ce compromis n'est accessible qu'avec l'apport des espèces micro-alliées qui, initiant une précipitation sous forme de carbonitrures, contribuent à affiner les grains de l'acier, condition indispensable à l'obtention de bonnes propriétés.