Relations entre la microstructure et le comportement mécanique des aciers trip pour application automobile
Institution:
Paris, ENMPDisciplines:
Directors:
Abstract EN:
In this thesis we propose to syudy a trip-aided steel (transformation induced plasticity). Charecterizations of the microstructure and of the mechanical behaviour are coupled with bibliographic research for: - understanding the relationship between the microstructure and the mechenical properties; - describing the influence of the retained austenite of the mechanical behaviour of the trip steel;- establishing a phenomenological law for the phase transformation of retained austenite into martensite;- identifying à 3d static behaviour model that lies on physical considerations. The general method that has been adopted connect the evolution of mechanical characteristics to the microstructure changes induced by the martensite formed during the deformation. Indeed, several studies on the stainless trip steels reported a high sensitivity of the mechanical behaviour in regerd to the martensitic transformation. In this optics, quantative measurements of the volume fraction of ratained austenite or of the martensite are necessary. A machinery that uses a magnetic method of measure has been developed for obtaining the kinetics of phase transformation (of retained austenite into martensite) for multiaxial loading paths. The mechanical behaviour model proposed here takes into consideration the phase transformation.
Abstract FR:
Dans ce travail on se propose d'étudier un acier trip (transformation induced plasticity). Caractérisations microstructurales et mécaniques sont couplées aux recherches bibliographiques en vue de: - comprendre les relations entre la microstructure et les propriétés mécaniques; - décrire l'influence de l'austenite résiduelle sur le comportement mécanique de l'acier;- proposer une loi phénoménologique pour la transformation de phase austenite résiduelle - martensite- identifier un modèle de comportement statique 3d à base physique. La démarche générale consiste à relier l'évolution des caractéristiques mécaniques aux caractéristiques évolutives de la microstructure, subséquentes à la formation de la martensité au cours de la déformation. Nombre d'études réalisées sur des aciers trip fortement alliés (aciers inoxydables) ont montré une forte sensibilité du comportement mécanique de ces aciers vis à vis de la transformation martensitique. Dans cette optique, des mesures quantitatives de la fraction volumique de l'austenite résiduelle ou de la martensite formée sont necessaires. Une technique de dosage magnétique de l'austenite résiduelle a été utilisée afin d'obtenir les cinétiques de la transformation austenite - martensite pour des sollicitations mécaniques choisies de facon à caractériser la réponse du matériau à différents trajets de chargement ou de déformation. Le modèle de comportement identifié prend en compte la transformation de phase.