Comportement thermomécanique des enrobés bitumeux à basses températures : relations entre les propriétés du liant et de l'enrobé
Institution:
Lyon, INSADisciplines:
Directors:
Abstract EN:
This thesis deals with the thermomechanical behavior of bituminous materials at low temperatures. The binder behavior was evaluated with three fundamental tests : i)the complex modulus determination, ii)the Bending Beam Rheometer and iii)the tensile strength at a constant strain rate and constant temperatures. A three point bending test on pre-notched bitumen beams was also developed. The thermo-mechanical mix behavior was studied by performing i)complex modulus tests, ii)measurements of the coefficient of thermal contraction, iii)tensile tests at constant temperatures and strain rates, and iv)Thermal Stress Restrained Specimen Tests. Apart from the determination of some pertinent links between binder and mix properties and discriminating characteristics with regard to the thermal cracking of bituminous mixes at low temperatures, the analysis has also consisted in modeling the behavior of bituminous binders and mixes, both in the small strain domain and in the large strain domain.
Abstract FR:
Cette thèse traite des relations entre les propriétés des liants et des enrobés bitumineux à basse température. Le comportement des bitumes fut évalué avec : i)l'essai de module complexe, ii)l'essai de fluage au BBR, iii)l'essai de traction SHRP à vitesse de déformation constante et températures constantes. Un essai de flexion trois points sur éprouvettes de bitume préentaillées a aussi été développé. Le comportement thermomécanique des enrobés fut étudié en réalisant i)des essais de module complexe, ii)des mesures du coefficient de contraction thermique, iii)des essais de traction à vitesses de déformation constantes, iv)des essais de retrait thermique empêché. Des liens pertinents entre les propriétés des liants et des enrobés, et des caractéristiques suffisamment discriminantes au regard des propriétés à basse température des enrobés ont été mis en évidence. Un travail de modélisation du comportement des liants et des enrobés a enfin été réalisé en petites et grandes déformations.