Mise au point de procédures d'essais mécaniques sur mortiers de terre : application à l'étude de leur rhéologie
Institution:
Lyon, INSADisciplines:
Directors:
Abstract EN:
Masonries in raw earth (soil) allow to build houses with an environmental moderate cost (and low cost for the south countries) because the use local materials. Of more this method has a positive socioeconomic impact because it favors the manual labour with know-how, contrary to the industrialization of the production of the material. The used architecture is adapted to the material which has to work only in compression. Numerous techniques of construction in earth use this material to the plastic state, the material is taken on-site and contains a quantity of clay from 5% to 20% in dry weight. We shall quote example adobes masonries (blocks of molded earth (MUD) and sun dried) and masonries in CEB (compressed earth block). This thesis presents an experimental study of the mechanical behavior of earth mortars and adobes which are in fact the same material before drying, hand molded of mechanically for the adobe, and put down by the trowel, in thin layer on blocks, for the mortar. The use of local materials implies that it is not possible to recommend a standard composition of materials, it is necessary to adapt to what is found on site. On the other hand we can try to standardize the tests used to control their mechanical quality.
Abstract FR:
Les maçonneries en terre crue permettent de construire des habitations à un faible coût environnemental (et économique pour les pays du sud) car on utilise des matériaux locaux. De plus cette démarche a un impact socio-économique positif puisqu'elle favorise le travail manuel avec savoir-faire, contrairement à la filière basée sur l'industrialisation de la production du matériau. L'architecture utilisée est adaptée au matériau qui ne doit travailler qu'en compression. De nombreuses techniques de construction en terre utilisent ce matériau à l'état plastique, le matériau est pris sur site et contient une quantité d'argile de 5% à 20% en poids sec. On citera par exemple les maçonneries en adobes (blocs de terre moulée et séchés au soleil) et maçonneries en BTC (Blocs de Terre Comprimée). Cette thèse présente une étude expérimentale du comportement mécanique des mortiers de terre et adobes qui sont en fait un même matériau avant séchage, il est moulé à la main ou mécaniquement pour l'adobe et déposé à la truelle, en couche mince sur des blocs, pour le mortier. La démarche d'utilisation de matériaux locaux implique qu'il n'est pas possible de préconiser une composition standard des matériaux, il faut pouvoir s'adapter à celui trouver sur site. Par contre on peut essayer de standardiser les essais permettant un contrôle de leur qualité mécanique.