thesis

Seismic reliability of Reinforced Concrete buildings erected on hard soil nearby epicenter (case of Guerrero, Mexico)

Defense date:

Dec. 10, 2009

Edit

Institution:

Paris Est

Disciplines:

Directors:

Abstract EN:

With real information provided by Mexican Institution, we begin this research. The objective is to measure the indexes of reliability of reinforced concrete buildings subjected to real seismic forces with near epicenter, erected on hard soil. There is a need to assess the uncertainty affecting the buildings in the State of Guerrero, since geophysical researches estimate a GAP of area of 220x90 2 km , which will generate an earthquake of Magnitude Mw=8.4. We expect that the predominant period has a range of 0.034 to 0.36 sec [Pérez D. and Mebarki A., 2007]. We achieved this, with the interpretation of 3600 real earthquake from a database of SMIS, selected by their great magnitude and near epicenter. Where the ordinate of the response spectrum of the ground should be superior than the design spectra, thereby considering the buildings that are at greatest risk of damage or collapse. Three proposals for buildings with different resistance emerge, that are: 1. To calculate according to the properties of the materials in the State of Guerrero. 2. To calculate with the properties of the region central of the country [RCDF], as currently done and. 3. To estimate a degradation of resistance of the buildings for the earthquakes suffered in the past. The capacity of lateral resistance of the buildings is considered with two analysis types, that are: 1. Static Adaptive Pushover Analysis [DAP], which measures the level of ductility that develops the building, knowing with this, the yield point and the ultimate capacity of each building. 2. Incremental Dynamic Analysis [IDA], in which the resistance of the building is evaluated in the time-history, with real seismic events scaled to know the duration in which the value of the state limit of the building has been exceeded. We observed that the indexes of reliability in the buildings subject to seismic forces with near epicenter are highly dependent on the conditions of ground and the magnitude of the earthquake. The effects of site changes significantly, when the magnitude of the seismic event increases, that make vary the building reliability indexes. These variations show the great importance and attention that should be devoted to properties of the materials in the State of Guerrero, because they influence significantly the fundamental period of the buildings

Abstract FR:

Cette recherche s’appuie pour certaines données, fournies par des institutions mexicaines sur des bases de donnée réelle. L’objectif est de mesurer les indices de fiabilité des bâtiments en béton armé soumis à des forces sismiques réelles avec épicentre proche, construits sur un sol rigide. Il existe une nécessité d’évaluer l’effet des incertitudes affectant les bâtiments de l’État de Guerrero, du fait que la recherche géophysique un estime GAP sismique avec une zone de 220x90 2km , qui produirait un événement sismique de magnitude Mw=8.4. Nous avons déterminé que la période prédominante de site dans un intervalle de 0.034 à 0.36 [Pérez D. and Mebarki A., 2007]. Nous obtenons ceci, avec l’interprétation de 3600 séismes réels d’une base de données de la SMIS, sélectionnés pour leur grande magnitude et épicentre proche. Lorsque l’ordonnée du spectre de réponse du sol est plus grande que celle du spectre du code, on doit approfondir l’analyses des bâtiments qui s’y trouvent du fait du plus grand risque de dommage et effondrement. Trois propositions de bâtiments de différentes résistances apparaissent, à savoir : 1. Calculer avec les propriétés des matériels de l’Etat de Guerrero. 2. Calculer avec les propriétés de la région centre du pays [RCDF], comme l’on fait actuellement, et, 3. Estimer une dégradation de résistance des bâtiments pour les séismes observé dans le passé. La capacité de résistance latérale du bâtiment est estimée avec deux types d’analyse. Il s’agit de : 1. Static Adaptive Pushover Analysis [DAP], avec laquelle nous mesurons le niveau de ductilité que développe le bâtiment, connaissant le point de plastification et la déformation ultime de chaque bâtiment. 2. Incremental Dynamic Analysis [IDA], pour évaluer en fonction de temps la résistance des bâtiments, soumis à des événements sismiques réels avec changement d’échelle et détermine les moments et la durée de l’état limite du bâtiment a été dépassé. On a observé que les indices de fiabilité dans les bâtiments soumis à des forces sismiques avec épicentre proche, dépendent beaucoup des conditions de sol et de la magnitude du séisme. Les effets de site changent de manière significative quand la magnitude de l’événement sismique augmente, ce qui fait varier les indices de fiabilité des bâtiments. Cette variation montre de l’importance à connaître les propriétés des matériaux de l’État de Guerrero, parce qu’ils influencent grandement sur la période fondamentale de l’édifice